From the course: SOLIDWORKS: Designing a Stirling Engine
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Create the heater bracket block - SOLIDWORKS Tutorial
From the course: SOLIDWORKS: Designing a Stirling Engine
Create the heater bracket block
- [Instructor] We're now going to leave the assembly for a while and start creating the parts for the heater section. This is the part of the engine that actually produces the power. And the first part that we'll make is a bracket to hold the heater cylinder. Start a new part and start a sketch on the top plane. Draw a sense of rectangle at the origin, make it 25 millimeters high and 60 millimeters wide. And then we're going to do an extruded boss base. So select that from the features tab, let's make this 100 millimeters and midplane, so it should just be a rectangular block like this. Press okay, and let's call that body. Next we're going to sketch a cutout for the cylinder itself. So start a sketch on this face, and then use the circle tool, and draw a circle, that's 40 millimeters diameter. It should be 69 millimeters from the bottom of the block, and it should be lined up with the origin. So that should fully…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
(Locked)
Create the heater bracket block4m 38s
-
(Locked)
Create the heater bracket cover4m 9s
-
(Locked)
Create the heater cylinder4m 58s
-
(Locked)
Create the inner piston3m 12s
-
(Locked)
Create the piston cap2m 42s
-
(Locked)
Create the piston rod3m 13s
-
(Locked)
Create the rod connector4m 20s
-
(Locked)
Create the linkage2m 12s
-
(Locked)
-
-
-
-
-