Model the joystick - SOLIDWORKS Tutorial

Contents

• Introduction Introduction

  • Introduction to designing for consumer electronics

    41s
  • What you should know and working with the files in this course

    2m 26s
• 1. Designing for Consumer Electronics 1. Designing for Consumer Electronics

  • Designing for consumer electronics

    1m 53s
• 2. Creating the Controller Shape 2. Creating the Controller Shape

  • Create the initial controller shape

    5m 22s
  • Sketch loft profiles for a handgrip

    8m 5s
  • Use lofts to make a flowing grip

    6m 4s
  • Smooth the controller grip using fillets

    2m 58s
  • Add the second half using mirroring

    3m 47s
  • Add button and joystick pads

    6m 7s
  • Hollow out the model using the shell feature

    2m 57s
• 3. Splitting the Shell and Creating an Assembly 3. Splitting the Shell and Creating an Assembly

  • Split the controller into two halves

    5m 40s
  • Create an assembly

    8m
• 4. Develop the Controller Shells Further 4. Develop the Controller Shells Further

  • Add fastening details

    4m 47s
  • Finish the standoffs

    6m 52s
  • Add ribs to the rear half

    10m 23s
  • Add ribs to the front half

    6m 16s
• 5. Create the PCB Model 5. Create the PCB Model

  • Create the PCB model

    7m 57s
  • Add the PCB to the assembly

    7m 27s
  • Cut away a space to fit the PCB within the assembly

    3m 12s
• 6. Add Buttons 6. Add Buttons

  • Model the buttons

    3m 23s
  • Add the buttons to the assembly

    5m 7s
  • Create the D-Pad buttons

    6m 16s
  • Add the D-Pad buttons to the assembly

    3m 4s
  • Model and add the center buttons

    6m 54s
• 7. Add Joysticks 7. Add Joysticks

  • Model the joystick

    4m 4s
  • Insert the joystick and adjust main case

    6m 26s
• Next Steps Next Steps

  • Next steps

    2m 17s