From the course: Cert Prep: SOLIDWORKS Sheet Metal
Unlock the full course today
Join today to access over 22,500 courses taught by industry experts or purchase this course individually.
Modeling a sheet metal part from a drawing - SOLIDWORKS Tutorial
From the course: Cert Prep: SOLIDWORKS Sheet Metal
Modeling a sheet metal part from a drawing
- [Instructor] In this example, I'm gonna go through the method that I use for creating a part based upon a drawing that you're gonna download or you're gonna see on the testing client for the sheet metal exam. Over here you can see I have the sample exam opened up, and this is the first question here. You can see I've got an A, B, and C dimension on this sheet metal part, so let's go ahead and start this over here on the right-hand side. So I have them both opened up in the same screen. More than likely, you're probably gonna be using a dual monitor setup so you can have test questions on one screen and SOLIDWORKS full screen on the other; but in this case here, we have to fit it all on one screen. So it might be a little bit cramped, but hopefully you'll be able to follow along. Up here I'm gonna click on New. Over here I've got a bunch of default templates. I definitely recommend installing some of these templates, especially these first two right here, into your SOLIDWORKS…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.