From the course: Cert Prep: SOLIDWORKS Weldments
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Placing gaps at corners and segment intersections - SOLIDWORKS Tutorial
From the course: Cert Prep: SOLIDWORKS Weldments
Placing gaps at corners and segment intersections
- [Instructor] In this movie, we're going to be looking at placing weld gaps, or other gaps at the intersection of different segments of this weldment. So as you can see here, I can open up this weldment, and inside of there you can see I can add a weld gap right in here. So, I can add this right here. So let's say, 0.25, and you can see what that does, it automatically places a gap here between the two segments, and that only applies to this group number one. Now, if you want to apply the same thing to group number two, you have to come over here and also add that same weld gap there, which then brings this back here and adds a little bit of a weld gap you can see right there. It's kind of pushing that up that quarter inch. Again, you have to make sure you choose the correct group, and then add in that weld gap between the items. You can also click over here, and click on that little pink or purple dot, and you can actually add corner-specific weld gaps as well. So, we only have one…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
(Locked)
Weldment profile creation4m 3s
-
(Locked)
Placing the weldment profile in the weldment profile library6m 5s
-
(Locked)
Basic and advanced weldment part creation5m 51s
-
(Locked)
Locating a weldment profile3m 19s
-
(Locked)
Weldment corner modification2m 17s
-
(Locked)
Profile alignment1m 35s
-
(Locked)
Placing gaps at corners and segment intersections1m 58s
-
(Locked)
End caps2m 2s
-
(Locked)
Gussets1m 37s
-
Weldment part modification2m 8s
-
(Locked)
Using the Trim/Extend command5m 24s
-
(Locked)
3D sketch creation4m 27s
-
(Locked)
Cut list folder management in the weldment part2m 13s
-
Cut list creation in the weldment drawing2m 33s
-
(Locked)
-
-