From the course: Cert Prep: Certified SOLIDWORKS Associate
Unlock the full course today
Join today to access over 22,500 courses taught by industry experts or purchase this course individually.
Revolve - SOLIDWORKS Tutorial
From the course: Cert Prep: Certified SOLIDWORKS Associate
Revolve
- To create revolve features, we want to make sure that we have a center line as well as a sketch. All it needs to be is one closed feature, goes all the way around, and we need a center line to revolve around. A couple things I want to point out while we're here. If you're adding dimensions to a drawing, I want to sometimes use what's called a double dimension that makes it a lot easier to input the exact values you might be getting from the exam. So to do that, so for instance, this is going to be 250 millimeter diameter, and not radius, so notice it goes as a double dimension. So I'm going to delete that for right now and go back. If I had to make a dimension from the top here to the bottom, it only gives me the option of the 125. But instead, if I were to give a dimension from the top to a center line, on this side here, it's 125, but as soon as I pass over the center line, notice it switches over to the double dimension, or the full diameter of that, so if I want the diameter…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
Sketch Entities8m 1s
-
(Locked)
Sketch Tools3m 44s
-
(Locked)
Sketch Relations2m 30s
-
(Locked)
Boss and Cut features2m 28s
-
(Locked)
Revolve3m 3s
-
(Locked)
Equations3m 30s
-
(Locked)
Sweeps and Lofts3m 21s
-
(Locked)
Fillets and Chamfers2m 3s
-
(Locked)
Linear and Circular patterns5m 2s
-
(Locked)
Dimensions3m 26s
-
(Locked)
Mass properties2m 25s
-
(Locked)
Materials1m 13s
-
(Locked)
Inserting components3m 14s
-
(Locked)
Standard Mates6m 58s
-
(Locked)
Reference geometry4m 11s
-
(Locked)
Drawing view types6m 6s
-
-
-
-