From the course: SOLIDWORKS 2013-2017: Sheet Metal Design
Unlock the full course today
Join today to access over 22,500 courses taught by industry experts or purchase this course individually.
Using the Edit Flange Profile tool - SOLIDWORKS Tutorial
From the course: SOLIDWORKS 2013-2017: Sheet Metal Design
Using the Edit Flange Profile tool
The Edge-Flange2 is awesome, however, what if we don't want a flange to go the whole length of the edge or we don't want just a basic edge flange? How about adding a hole or two? It's all possible using the Edit-Flange Profile tool. There are a few rules that we need to follow to make the flange build correctly. To get started, let's go ahead and choose this edge over here, and click on the Edge-Flange2. We get the little pop-up displaying the flange as we see it. If I spin it around, notice over here on the left, right under the edge I chose, I have this Edit-Flange Profile button. If I click on that, it puts me into a Sketch Mode and I have the ability to then grab any of these sketch lines and move them around. Notice the lines on the right and left are black. That doesn't mean you can't grab them, and still move 'em around. So, I can adjust the length of that flange, the height of that flange. And if I want to even zoom in on it, I can even add onto it. So in this case here, we'll…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
(Locked)
Creating a base feature5m 37s
-
Looking at the Flange tool5m 12s
-
(Locked)
Creating tabs5m 3s
-
(Locked)
Making an edge flange5m 33s
-
(Locked)
Using the Edit Flange Profile tool3m 12s
-
(Locked)
Using the miter flange4m 21s
-
(Locked)
Making a swept flange2m 59s
-
Using the Jog feature5m 20s
-
(Locked)
Making hems3m 7s
-
(Locked)
-
-
-
-
-
-
-
-