From the course: Cert Prep: SOLIDWORKS Weldments
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Weldment profile creation - SOLIDWORKS Tutorial
From the course: Cert Prep: SOLIDWORKS Weldments
Weldment profile creation
- [Instructor] One of the first things you're going to need to know to do the Weldment exam is how to create your own custom profiles. Now, most of the time, if you're using Weldments, there's a lot of predefined profiles, so you might not be creating your own profiles or you've never done it before. So, we definitely want to sure you're familiar with how to create your own profile and how to save it to the file system. So, let's go ahead and start with a basic profile. So, I'm going to head up here to Sketch, start a brand new sketch, and I'm going to start it right here on the front plane. Now, it doesn't matter what you really draw as long as it's one enclosed profile that you can extrude. Think about it like a spaghetti machine, so anything that's a enclosed boundary, you just can create that shape and then what you're going to extrude out to be that Weldment. So, in this case, I'm just going to use a basic corner rectangle or a center rectangle, in this case here. So, center…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
(Locked)
Weldment profile creation4m 3s
-
(Locked)
Placing the weldment profile in the weldment profile library6m 5s
-
(Locked)
Basic and advanced weldment part creation5m 51s
-
(Locked)
Locating a weldment profile3m 19s
-
(Locked)
Weldment corner modification2m 17s
-
(Locked)
Profile alignment1m 35s
-
(Locked)
Placing gaps at corners and segment intersections1m 58s
-
(Locked)
End caps2m 2s
-
(Locked)
Gussets1m 37s
-
Weldment part modification2m 8s
-
(Locked)
Using the Trim/Extend command5m 24s
-
(Locked)
3D sketch creation4m 27s
-
(Locked)
Cut list folder management in the weldment part2m 13s
-
Cut list creation in the weldment drawing2m 33s
-
(Locked)
-
-