From the course: FARO SCENE 3D Laser Scan Registration
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Advanced registration techniques, part 3 - Scene Tutorial
From the course: FARO SCENE 3D Laser Scan Registration
Advanced registration techniques, part 3
- [Instructor] Now I have separated all the scans out into the locker area, which has showers as well and the offices. So at this point, I can run a registration on each of these two clusters. They are small enough to be manageable. And the way I can do that is to simply right click and say operations registration, place scans. But because we've been working in the ribbon menu for the most part, I'm going to jump over there and keep using that. Because I predict that Faro will continue to develop this ribbon menu to the point where it works very well, and all the tools that we'll need will be available here. So the classic menu will probably remain classic and go out at some point. So we really need to get familiar with this ribbon interface, I would assume. So going over here to the registration, I can click on this perform automatic registration from the lockers. And we're going to go ahead and do target based again, because I have cleaned up the targets, and we're going to try to…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
(Locked)
Navigation controls for viewing in 2D/3D16m 5s
-
(Locked)
Visibility settings10m 49s
-
(Locked)
Using clipping boxes14m 11s
-
(Locked)
Using the measurement tools10m 45s
-
(Locked)
Noise identification and removal4m 5s
-
(Locked)
Top-down and cloud-to-cloud registration tools15m 37s
-
(Locked)
FARO 2018 and 2019 preprocessing with top-down and cloud-to-cloud5m 44s
-
(Locked)
Correspondence view quality control5m 43s
-
(Locked)
Target-based registration, part 14m 29s
-
(Locked)
Target-based registration, part 216m 47s
-
(Locked)
Using the Transformation tools for shift correction5m 37s
-
(Locked)
Manually aligning X, Y, and Z shifts5m 42s
-
(Locked)
Manually aligning tilted and angled shifts5m 26s
-
(Locked)
Advanced registration techniques, part 125m 52s
-
(Locked)
Advanced registration techniques, part 28m 28s
-
(Locked)
Advanced registration techniques, part 322m 29s
-
(Locked)
Advanced registration techniques, part 47m 41s
-
(Locked)
Advanced registration techniques, part 527m 4s
-
(Locked)
Advanced registration techniques, part 627m 39s
-
(Locked)
Registration using survey data11m 51s
-
(Locked)
-
-
-
-
-