From the course: FARO SCENE 3D Laser Scan Registration
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Advanced registration techniques, part 5 - Scene Tutorial
From the course: FARO SCENE 3D Laser Scan Registration
Advanced registration techniques, part 5
- [Narrator] In this example, I had this cluster of 1168 through 174. I've been rearranging 'em a little bit. And 174 just does not want to align with these other scans even though it's adjacent. So let's take a look at what's going on here. So if I right click on that and say Locate, it will take me to the nodal point of the scan. So there's the scanner, and its relative location. And what I'm seeing here, so I tried target-based and I tried Cloud to Cloud with multiple iterations and what I'm still seeing is an alignment problem down here underneath this metal bar. So, where we're looking for is where the gray meets the yellow because that's the relationship of that scan to the other scans. So if I put an anchor point here, and I zoom in, and I'm just going to look at this wall from the side. I see this gap here and that's just a little over a quarter of an inch if we measured it. So, really nothing I've been doing has been able to pull this scan in with the other ones. Again, these…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
(Locked)
Navigation controls for viewing in 2D/3D16m 5s
-
(Locked)
Visibility settings10m 49s
-
(Locked)
Using clipping boxes14m 11s
-
(Locked)
Using the measurement tools10m 45s
-
(Locked)
Noise identification and removal4m 5s
-
(Locked)
Top-down and cloud-to-cloud registration tools15m 37s
-
(Locked)
FARO 2018 and 2019 preprocessing with top-down and cloud-to-cloud5m 44s
-
(Locked)
Correspondence view quality control5m 43s
-
(Locked)
Target-based registration, part 14m 29s
-
(Locked)
Target-based registration, part 216m 47s
-
(Locked)
Using the Transformation tools for shift correction5m 37s
-
(Locked)
Manually aligning X, Y, and Z shifts5m 42s
-
(Locked)
Manually aligning tilted and angled shifts5m 26s
-
(Locked)
Advanced registration techniques, part 125m 52s
-
(Locked)
Advanced registration techniques, part 28m 28s
-
(Locked)
Advanced registration techniques, part 322m 29s
-
(Locked)
Advanced registration techniques, part 47m 41s
-
(Locked)
Advanced registration techniques, part 527m 4s
-
(Locked)
Advanced registration techniques, part 627m 39s
-
(Locked)
Registration using survey data11m 51s
-
(Locked)
-
-
-
-
-