From the course: SketchUp for Architecture: Details
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Add the low-level stucco - SketchUp Tutorial
From the course: SketchUp for Architecture: Details
Add the low-level stucco
- [Instructor] Chapter Five Oh Seven. We're going to add some finish to the very bottom of the wall now between the patio concrete and the door threshold and the underside of the cladding. So zoom in a bit. First up we're going to put some wall board in there. Insulating wall board. So let's come down to the T for Thermal wallboard. Pick that up and drop that in. At that point, I think that should be in the right position. Good enough. And then I have got some mesh, so Lower mesh, that comes complete with the fixings. So let's drop that in like so. That sits on the top as well. So that's looking good. So a bit of insulation to protect. So we've given it a little bit of extra insulation there. So insulated on the inside here. Ground insulated from there as well, but just a little bit of extra. And again, depending on (mumbles) levels, then you might need to up the insulation levels to your code. Then…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
(Locked)
Insert the high-level window4m 53s
-
(Locked)
Insert the doors3m 42s
-
(Locked)
Build up the rainscreen5m 19s
-
(Locked)
Add the three-coat stucco at a high level3m 38s
-
(Locked)
Add the flashings and trim5m 39s
-
Build up the external levels2m 17s
-
(Locked)
Add the low-level stucco2m 34s
-
(Locked)
Finish off the internal walls4m 7s
-
(Locked)
-
-
-
-
-