From the course: SketchUp Pro: Modeling a Lamp
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Building the base - SketchUp Tutorial
From the course: SketchUp Pro: Modeling a Lamp
Building the base
- [Instructor] Chapter 03_06, we're going to put the base and the swivel connector together. And providing we've got a six mil hole on the base, and a six mil diameter spigot on the swivel connector, then everything should be fine. I'm loading these from the 01_Base folder, which was part of the exercise file download. If you don't have access to the exercise files, and you've made the bits, then just locate them. It's only these two bits that we'll be using to start off with just so we can get a feel for how these things go together. So, I'm going to bring in the base. That's the first thing. Drop that in. That sort of drops in at the origin point, and then this one, the swivel connector complete. And I'm going to drop that in, but it's probably not going to go in that spot-on. So, the easiest way to position this is by the spigot. Okay, we haven't got any of those little guidelines on this 'cause it's quite an easy thing to do. So, track into the center, and then track into the…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
Understanding the springs2m 13s
-
(Locked)
The small spring connection4m 16s
-
The spring barrel and hook4m
-
(Locked)
Completing the springs2m 47s
-
(Locked)
The spring retainer pin5m 2s
-
(Locked)
Building the base2m 15s
-
(Locked)
Adding the springs3m 55s
-
(Locked)
Connecting up the lower armature5m 2s
-
-
-
-
-