From the course: SketchUp for Architecture
Unlock this course with a free trial
Join today to access over 22,600 courses taught by industry experts.
Building the high units - SketchUp Tutorial
From the course: SketchUp for Architecture
Building the high units
- [Educator] Chapter 7_06, we're going to do a very similar task to the bottom bits but we've got slightly less of them to do. And we're going to just be careful where we put our rectangles. I finished off by making this one and I've turned this into component. So I've called this lower unit left, I think, and this one lower unit right. I just organized the geometry. Feel free to give them your own names, and you can also use groups instead of components if you prefer, but as long as you've isolated the geometry. Then we can build it into a bigger component later on. Okay, so rectangle tool at the ready. We'll come in and just be careful this time, because we're coming from this point up to this point here. There's a line missing there, so that should be a pelmet trim. And we'll come over and go from this point down to this point here, okay? Now we can push pull these this depth. Just check the depth, 345, so whatever the imperial equivalent is from the tape measure tool, then use…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
-
(Locked)
Introduction to modeling the interior fixtures2m 43s
-
(Locked)
Adding the chimney stack4m 23s
-
(Locked)
Creating the fire pit5m 6s
-
(Locked)
Creating the island unit5m 1s
-
(Locked)
Building the low units4m 7s
-
(Locked)
Building the high units5m 31s
-
(Locked)
Building the left-side kitchen units2m 13s
-
(Locked)
Adding the pelmet and base trim5m 3s
-
(Locked)
Adding the work surface5m 1s
-
(Locked)
Dropping in the sink top6m 33s
-
(Locked)
Adding the cooker and hood5m 9s
-
(Locked)
Adding the fridge5m 26s
-
(Locked)
Decorating the west-wing interior4m 42s
-
(Locked)
Loading the furniture and finishes4m 56s
-
(Locked)
-
-
-
-