From the course: SketchUp Pro: Modeling a Lamp
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Completing the swivel connection - SketchUp Tutorial
From the course: SketchUp Pro: Modeling a Lamp
Completing the swivel connection
- [Instructor] Chapter 108, we're going to finish off this swivel connector. So let's have a little look at what we've got to do to finish it off. We've got a spigot, which is 24 mil. And that's six mil diameter, so that's going to come down from the center of the square. We've also got a four mil diameter hole at 20 mil up from this sort of return point here. And then we've got a two mil diameter hole, which is central on sort of the circle, okay? There's a line on the edge that's going to define that for us, so that's okay. And then we've got five mil, our little stub guidelines coming off from the center of the hole, and 16 and a half mil from these, okay? It all makes sense later on. So we're going to go back to the chapter 108 sketch up file and finish off our swivel connector. Okay, so we're back here. Let's start off by putting some holes in. So I'll zoom in on this top bit. So you need to double click to get access to the component, and then with the circle tool, we'll just…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
Setting up the template1m 58s
-
(Locked)
Loading the components1m 41s
-
(Locked)
Making the base profile5m 3s
-
(Locked)
Making the base part4m 39s
-
(Locked)
Making the swivel connection profile, part 13m 41s
-
(Locked)
Making the swivel connection profile, part 23m 13s
-
(Locked)
Making the swivel connection part4m 2s
-
(Locked)
Completing the swivel connection5m 25s
-
-
-
-
-
-
-