From the course: SketchUp Pro: Modeling a Lamp
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Connecting the shade to the shade holder - SketchUp Tutorial
From the course: SketchUp Pro: Modeling a Lamp
Connecting the shade to the shade holder
- Chapter 503, we're going to a doing a very similar thing to the previous exercise where we joined the shade, so I'll bring that in. And the shade holder. Okay, so there they are. We have got to put a little guide on this one and then rotate this through 90 degrees and sort of line it up with this, so that means scaling this out just a little bit. Okay, so the first thing we'll do is just with the Move tool just spin this through 90 degrees and then we can double click. And with the Tape Measure tool find that center point. So off to the edge and then drop in and it should find it and make sure we're coming up on the correct axis, so green in this case. And that will be say, two mil. That's okay, that's all we need for that. So they're two mil to the center. And then we can bring this out. Now we've also got to put little guides on these bits. So, either side. So again, double click and Tape Measure tool. I will hopefully find the midpoint, and can come out to say, two on that side…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
The upper armature explained3m 59s
-
(Locked)
Connecting the bulb and bulb holder4m 5s
-
(Locked)
Connecting the shade to the shade holder4m 2s
-
(Locked)
Building the upper armature3m 22s
-
(Locked)
Putting it together4m 32s
-
(Locked)
Making the pins5m 53s
-
(Locked)
Placing the pins5m 24s
-
(Locked)
Making the armature hinge pin3m 56s
-
(Locked)
The final pieces5m 20s
-
-
-