From the course: SketchUp Pro: Modeling a Lamp
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Making the armature hinge unit parts - SketchUp Tutorial
From the course: SketchUp Pro: Modeling a Lamp
Making the armature hinge unit parts
- Chapter 2_04. Were going to make the parts that make up the armature hinge unit and in the next lesson, we will put it all together and put our little guidelines in as well. So to start off with we're going to just like take a little look at what we're going to make. So this is it. The Armature Hinge Unit. And we got this tube which is basically a doughnut which has been extruded. And the same profile is used for this bit as well. We just, we copy it to a different position 20 mil away and then extrude these bits and pieces. There's an order in which we will copy and extrude just to make life a little bit easier for ourselves but that's pretty much it. So afar as dimensions go we need to remember it's five mil for the large diameter and two mil for the small one. So with a circle tool go to the origin point and create your first circle. This is a two and a half mil radius. Probably a good idea to drag down on one of the axes. So I'm going on the green axis 2.5 enter and then another…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
Investigating the lower armature of the lamp3m 16s
-
(Locked)
Making the base arm profile3m 37s
-
(Locked)
Completing the base arm component4m 17s
-
(Locked)
Making the armature hinge unit parts3m 54s
-
(Locked)
Putting the armature hinge together3m 38s
-
(Locked)
Forming the rear arm body3m 35s
-
(Locked)
Finishing the rear arm body4m 27s
-
(Locked)
Completing the rear arm5m 9s
-
-
-
-
-
-