From the course: SketchUp Pro: Modeling a Lamp
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Making the base profile - SketchUp Tutorial
From the course: SketchUp Pro: Modeling a Lamp
Making the base profile
- [Instructor] Chapter 103, we're going to make this base profile. So we've got a blank template setup, this is the one we created at the beginning of this chapter, we're going to flick over to the PDF. It's also available for you Okay, we're back to the PDF. And this gives us the dimensions that we are looking for, for the Base_profile. Then we've got some offsets, one at 44 mil, this is level at six mil. And then we've got an angle of this line, one degree going up and then this one, one degree coming down, and two and a half mil radius for the internal and external corners. and then I'm going to hit the Forward Arrow to orientate to the red direction. And I'm going to come across at 75. And then I'm going to go up, so that's 75 comma, that's going to set the size that's T on the keyboard. Tape measure to allows us to put guidelines in, so the first one coming across, make sure you're on the surface not somewhere away from x, it might go a different direction. So six mil and that's…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
Setting up the template1m 58s
-
(Locked)
Loading the components1m 41s
-
(Locked)
Making the base profile5m 3s
-
(Locked)
Making the base part4m 39s
-
(Locked)
Making the swivel connection profile, part 13m 41s
-
(Locked)
Making the swivel connection profile, part 23m 13s
-
(Locked)
Making the swivel connection part4m 2s
-
(Locked)
Completing the swivel connection5m 25s
-
-
-
-
-
-
-