From the course: SketchUp Pro: Modeling a Lamp
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Making the swivel connection profile, part 2 - SketchUp Tutorial
From the course: SketchUp Pro: Modeling a Lamp
Making the swivel connection profile, part 2
- [Narrator] Chapter One, 0-6, we're going to make the to the PDF just to check on a few dimensions We've got a and it tapers down to 11 and a half mil at the top, okay? So back into Chapter one 06. in one direction. So comma one four six in the other direction. So 146 high, 19.5 mil across. And then we're going to use our tape measure tool, so that's T on the keyboard, and we'll come to the midpoint and then we'll come across 5.75 (keyboard clicking) in one direction, and 5.75 in the opposite direction. (keyboard clicking) (keyboard clicking) And that's going to give us the width of our circle And that's going to give us the width of our circle and then we'll just come down from the midpoint 5.75 again. and then we'll just come down from the midpoint 5.75 again. (keyboard clicking) (keyboard clicking) So, that's pretty much it. So, that's pretty much it. We need to put a circle in at this point and then join the lines from that intersection down and then join the…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
Setting up the template1m 58s
-
(Locked)
Loading the components1m 41s
-
(Locked)
Making the base profile5m 3s
-
(Locked)
Making the base part4m 39s
-
(Locked)
Making the swivel connection profile, part 13m 41s
-
(Locked)
Making the swivel connection profile, part 23m 13s
-
(Locked)
Making the swivel connection part4m 2s
-
(Locked)
Completing the swivel connection5m 25s
-
-
-
-
-
-
-