From the course: SketchUp & Revit Workflow
Unlock this course with a free trial
Join today to access over 22,600 courses taught by industry experts.
One World mass - SketchUp Tutorial
From the course: SketchUp & Revit Workflow
One World mass
- [Instructor] So Chapter 602, this is the Revit Massing environment and I'll show you how to get there in a second. I just want to explain what I've got set up. Three levels here. This is the top of the body of the One World Tower and this is the base of it. I'm going to show you how you can (mumbles) crudely make this based on some heights that I've taken from the sketch up model. Now that's available on a PDF in Chapter Six folder and this is it. So the sorts of sizes and just as you man it a little bit, you can just about see the sorts of sizes we've got and 541 meters from base to tip or 1,776 feet from base to tip. And then we've got 64 meters squared base and 209 feet and that is 187 feet high or 57 meters. Then the top section is a 45 square rotated through 45 degrees. Of course, it's 148 feet. Okay, don't forget the actual Tower bit. These are the levels I've created so one here, one here, and one here. So before we get cracking, I'll just explain how you can get into the…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
One World Tower1m 50s
-
(Locked)
One World mass7m
-
(Locked)
Completing the One World mass3m 4s
-
(Locked)
Adding the mass to the project4m 43s
-
(Locked)
Mass design options4m 29s
-
(Locked)
Using an in-place mass in Revit5m 21s
-
(Locked)
Creating a Revit mass from a SketchUp mesh2m 27s
-
(Locked)
Creating the main stack4m 10s
-
(Locked)
Slicing off the faces4m 4s
-
(Locked)
Forming the entrance recesses5m 9s
-
(Locked)
Sweeping the groove4m 43s
-
(Locked)
Sculpting the corners7m 19s
-
(Locked)
Parapet recess2m 39s
-
(Locked)
Mass floors6m 2s
-
(Locked)
Adding the mast2m 48s
-
-
-
-