From the course: SketchUp & Revit Workflow
Unlock this course with a free trial
Join today to access over 22,500 courses taught by industry experts.
Parapet recess - SketchUp Tutorial
From the course: SketchUp & Revit Workflow
Parapet recess
- [Instructor] Right, so, the parapet recess is the next bit, this bit here, very easy compared to the last bit. So, Chapter 06-13, don't forget to show mass if you're opening up for the first time. Now I'm going to my east elevation. And, let's turn on wire frame as well. Let's have a look at this. So, we've got distance there, 664, so about two feet. And this one is about 1320, so we're looking at about four and a half feet there. So, back to 3D. What I'll do is just turn this off. So I'll hide that in-View. This makes life a little bit easier for us. And select this and Edit in-Place. Now, I'm going to sort of create my offset around here for about 750, and the drop I'll probably put about fifteen hundred, it doesn't matter, it's just the principle of it that's important. And I'm going to use the pick lines and give myself an offset value of 750. And then I can orbit around a little bit and then just make sure I'm picking the line, so that's the dotted line that's on the inside…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
One World Tower1m 50s
-
(Locked)
One World mass7m
-
(Locked)
Completing the One World mass3m 4s
-
(Locked)
Adding the mass to the project4m 43s
-
(Locked)
Mass design options4m 29s
-
(Locked)
Using an in-place mass in Revit5m 21s
-
(Locked)
Creating a Revit mass from a SketchUp mesh2m 27s
-
(Locked)
Creating the main stack4m 10s
-
(Locked)
Slicing off the faces4m 4s
-
(Locked)
Forming the entrance recesses5m 9s
-
(Locked)
Sweeping the groove4m 43s
-
(Locked)
Sculpting the corners7m 19s
-
(Locked)
Parapet recess2m 39s
-
(Locked)
Mass floors6m 2s
-
(Locked)
Adding the mast2m 48s
-
-
-
-