From the course: SketchUp Pro: Modeling a Lamp
Unlock the full course today
Join today to access over 22,500 courses taught by industry experts or purchase this course individually.
The final pieces - SketchUp Tutorial
From the course: SketchUp Pro: Modeling a Lamp
The final pieces
- [Instructor] Chapter five, 09. The final pieces, we have got two bits to do, not one sorry. We've got this thing across here and then we've got a little switch that comes in here. The switch is really simple, this is a little tricker. A few moves to concentrate on but compared to what we've created, nothing too taxing. So first of all, we're going to use the tape measure tool, I'm going to come down from this line, 90 ml okay that's the position of the center of this tube. With that we've got the circle tool and we're going to put our circle at the intersection of this guideline and this outline coming down, but before we click I'm going to hit the back arrow to make sure it's going in the green direction so it's coming straight across and not at an angle, and then we're going to track out and enter 2.5 and hit enter, that's our radius. And it's going to give us a 5 ml diameter, a circle. Okay so now we're going to push pull from one side to the other and then we're going to use the…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
The upper armature explained3m 59s
-
(Locked)
Connecting the bulb and bulb holder4m 5s
-
(Locked)
Connecting the shade to the shade holder4m 2s
-
(Locked)
Building the upper armature3m 22s
-
(Locked)
Putting it together4m 32s
-
(Locked)
Making the pins5m 53s
-
(Locked)
Placing the pins5m 24s
-
(Locked)
Making the armature hinge pin3m 56s
-
(Locked)
The final pieces5m 20s
-
-
-